outreach

LinkedIn InMail Strategies That Work in 2026

LinkedIn InMail explained: what it is, how credits work, who should use it, and how to write InMail messages that get replies. Includes 3 free templates.

12 min read

LinkedIn InMail Strategies That Work in 2026 [+3 Free Templates]

TL;DR

LinkedIn InMail is a paid messaging feature that lets you message members you're not connected to. Credits are limited and depend on your plan, so use them wisely. Some members have Open Profile enabled, which lets you message them without spending a credit. The 7 tips below will help you write better messages, and the 3 templates are ready to use. There is no official benchmark for a "good" InMail response rate, so track your own numbers and treat any figure you read as a rule of thumb.


What Is LinkedIn InMail?

LinkedIn InMail is a direct message you can send to a LinkedIn member you're not connected to, using a credit that comes with a paid LinkedIn plan.

Unlike a connection request note (limited to roughly 300 characters), InMail gives you a subject line and up to 1,900 characters, and it lands directly in the recipient's inbox.

You need a paid LinkedIn account to send InMails. Credits are allocated monthly based on your plan: Premium plans include a small monthly allowance, while Sales Navigator and Recruiter plans include more. LinkedIn sets and changes these numbers, so check LinkedIn's help page for the current allowance on your plan.

Unused credits can carry over for a limited time, up to a cap that LinkedIn publishes and that can vary by plan.

Important: LinkedIn refunds an InMail credit when the recipient replies to your message. This means your effective capacity is higher than the raw credit count if your response rate is good.


Who Should Use LinkedIn InMail?

InMail works best when each message is worth the credit. For B2B outreach, that usually means a small number of high-value prospects rather than a long list.

  • B2B sales teams: Reaching senior decision-makers who ignore connection requests from strangers, or who are hard to reach by email.
  • Agencies: Pitching a specific service to marketing, growth or operations leads where a tailored first message matters more than volume.
  • Advisors and consultants: Starting a conversation with founders or executives where credibility and a thoughtful opener count.
  • Peer-group chairs: Inviting senior leaders to a membership or peer group, where a personal, well-researched message beats a template.

If your goal is recruiting or job hunting, this guide is not the right fit. It focuses on B2B sales outreach.


How to Send an InMail on LinkedIn?

Sending an InMail is straightforward:

  1. Go to the profile of the person you want to message
  2. Click the "Message" button (it's labelled "Message" for everyone, whether you're connected or not)
  3. If you're not connected, LinkedIn will show a prompt explaining that the message will use an InMail credit, along with your remaining credits
  4. Write your subject line (up to 200 characters)
  5. Write your message (up to 1,900 characters)
  6. Click "Send"

Before sending, check whether the person has "Open Profile" enabled. If they do, you can message them for free without using a credit, and LinkedIn won't show the credit prompt. Check for it before you spend a credit on someone who may not need one.


7 Tips to Make a Good LinkedIn InMail

1. Lead with something specific to them

Generic openers get generic results. Reference something real: a post they wrote, a company milestone, a shared connection, a problem specific to their industry. This signals that you actually looked at their profile and aren't blasting the same message to 500 people.

2. Keep it short

The 1,900-character limit is a ceiling, not a target. Many senders aim for roughly 100-150 words. Long messages signal that you're going to be a lot of work. Short messages signal confidence and respect for the recipient's time.

3. Make the ask small

Instead of "Can we schedule a 30-minute call?", try "Would it be worth a quick 10-minute chat, or is this not relevant for you right now?"

The second version lowers the commitment threshold and gives the person an easy out. Giving people an easy way to say no can help, because it removes the pressure that makes people ignore messages entirely.

4. Write a subject line that earns a click

Your subject line determines whether the message gets opened. Keep it short, ideally under 8 words. Make it specific to the recipient or their situation. Avoid generic subject lines like "Quick question" or "Partnership opportunity."

5. Don't pitch in the first message

The goal of the first InMail is to start a conversation, not to close a deal. If you lead with your pitch, you're asking someone to invest attention in you before you've given them any reason to. Lead with curiosity or value, not your product.

6. Follow up once

If you don't hear back after 5-7 days, one follow-up is appropriate. Keep it brief and don't repeat your pitch. Something like: "Wanted to bump this up in case it got buried. Happy to share more context if useful."

After two messages with no response, move on. Sending a third or fourth message hurts your reputation and wastes credits.

7. Send on the right days

Many senders find that response rates dip on Fridays and over weekends, and that Tuesday through Thursday tends to work well for B2B InMail. Monday mornings, when inboxes are crowded, are worth avoiding. Test this against your own results.


3 LinkedIn InMail Templates That WORK

Template 1: The Trigger-Based Opener

Use when: a prospect just changed jobs, got promoted, or posted about a relevant topic.

Subject: Congrats on the new role

Hi [Name], congrats on the move to [Company]. The first 90 days in a [title] position usually involve [relevant challenge]. We've helped a few people in similar situations with [specific outcome]. Worth a quick conversation?

Template 2: The Content Engagement

Use when: they recently posted something relevant to what you do.

Subject: Your post on [topic]

Hi [Name], your post on [topic] was spot on, especially the part about [specific point]. We've been seeing the same pattern with [relevant context]. Curious if you've found a solution that works. Happy to share what we've seen if useful.

Template 3: The Direct Value Offer

Use when: you have a specific, concrete offer relevant to their situation.

Subject: [Company] + [specific outcome]

Hi [Name], I noticed [Company] is [relevant signal, such as hiring or expanding], which usually means [relevant implication]. We've helped [similar companies] [specific outcome] in [timeframe]. Would it make sense to connect?


3 Best Subject Lines for LinkedIn InMail

The subject line is the first thing recipients see. These three formats tend to work better than generic alternatives:

1. The specific reference: "[Their company name] + [relevant topic]", e.g., "Acme Corp + reducing sales cycle"

2. The mutual connection: "[Mutual connection's name] suggested I reach out". Social proof in the subject line can help the message get opened.

3. The trigger event: "Congrats on [specific milestone]". Acknowledging a real event shows you did your homework and isn't generic.

Avoid: "Quick question," "Partnership opportunity," "Following up," or anything that sounds like a mass email.


What Are LinkedIn InMail Credits?

InMail credits are the currency LinkedIn uses for its paid messaging feature. Each InMail you send to someone you can't message for free costs one credit. Credits are allocated monthly based on your subscription plan, and unused credits can carry over up to the cap LinkedIn publishes for your plan.

The credit refund mechanic is important: when a recipient replies to your InMail, LinkedIn returns the credit. A strong response rate means each credit goes further. A weak one means you are spending credits on messages that go nowhere.


How to Get More LinkedIn InMail Credits?

Upgrade your plan: Sales Navigator and Recruiter plans come with a much larger monthly allowance than Premium plans. Check LinkedIn's help page for the current numbers.

Use your rollover: If you know a big campaign is coming, you can hold back InMail usage in the months before, within the accumulation cap LinkedIn publishes for your plan.

Use the open profile hack: Check whether prospects have Open Profile enabled before sending a paid InMail. If they do, message them for free and save the credit for someone who requires it.

Improve your response rate: Every reply returns a credit. Better targeting and more specific messages mean more refunds and more reach from the same allocation.


What's the Difference Between LinkedIn InMail vs. Message?

FeatureInMailRegular Message
Who you can reachMembers you're not connected toOnly 1st-degree connections
Cost1 credit per messageFree
Character limit1,900 charactersMuch longer than InMail
Subject lineYes (up to 200 characters)No
Credit refund on replyYesN/A
Requires connectionNoYes

The key difference: InMail reaches people you're not connected to. Regular messages are free but limited to your existing connections.

InMail vs. connection request plus message

The other common way to reach someone you don't know is to send a connection request, then message them once they accept. Here is how the two approaches compare:

FeatureInMailConnection request + message
CostUses a credit (returned on reply)No credit
When they see itImmediately, in their inboxThe note arrives with the request; the full message only after they accept
First message lengthSubject line plus up to 1,900 charactersShort note (around 300 characters) with the request
Needs an action firstNoYes, they must accept
Best forSenior, high-value prospectsLarger lists and relationship building

A practical approach is to use both: InMail for the smaller group of prospects who matter most and who are unlikely to accept a request from a stranger, and connection request plus message for the rest.


How Outly Runs InMail

Outly treats InMail as one step in a campaign sequence, alongside connection invitations, messages and follow-ups. Steps run in order, and InMail sits next to your connection-request outreach, so you can use both channels in the same workflow.

The human-in-the-loop angle is the point. AI drafts each message from the prospect's profile, and every draft goes to an approval queue where you approve, edit or regenerate it before anything is sent. That is useful for InMail in particular, because each message is worth a credit and should be worth reading.

You still need a paid LinkedIn plan to send InMails. Outly helps you plan, personalize and review them.


What Are the LinkedIn InMail Limits?

LinkedIn limits InMail usage in two ways:

Monthly credit limits: Based on your subscription plan, as described above.

Rollover cap: Unused credits can carry over only up to a cap LinkedIn publishes, and older credits expire after that.

LinkedIn's help documentation describes InMail in terms of credits rather than a separate daily InMail cap. LinkedIn does apply general limits to messaging and connection requests, and it doesn't treat every account the same way. If you do high-volume outreach, Outly pauses invites for an account when LinkedIn's invitation limit is hit, and keeps your messaging personalized in the meantime.


Conclusion

Most LinkedIn InMails get ignored not because the channel is broken, but because the messages are. The same tired opener, the same generic pitch, the same ask for "a quick 15-minute call" from someone you've never spoken to.

InMail is a powerful channel when used correctly. Lead with something specific. Keep it short. Make the ask small. Follow up once. And check for open profiles before spending a credit.

If replies are low, the problem is usually targeting (wrong audience) or messaging (wrong angle). Your own reply data will tell you which one.


Frequently Asked Questions

Can I send InMail without a premium account? No. InMail requires a paid LinkedIn subscription. Free accounts can only message their 1st-degree connections.

Do InMail credits expire? Unused credits can carry over, but only up to the accumulation cap LinkedIn publishes for your plan, and older credits expire after that. You can't stockpile indefinitely.

What happens if someone doesn't respond to my InMail? You don't get the credit back. Credits are only returned when the recipient replies. This is why response rate matters so much for InMail ROI.

Can I send InMail to anyone? Almost. People who have opted out of InMail in their privacy settings can't be reached this way.

Is InMail better than a connection request? It depends on your goal. InMail reaches people immediately without requiring acceptance. Connection requests don't use credits but require the person to accept before you can message them. For cold outreach to senior decision-makers, InMail can perform better because it doesn't require them to take an action first.


Ready to run LinkedIn outreach with every message reviewed before it goes out? Outly combines AI-personalized messages, a human approval queue, follow-ups, voice notes and video, LinkedIn, email and InMail, and imports from Sales Navigator and LinkedIn search. Plans start at $197/month, and you can start your 14-day free trial.

<script type="application/ld+json"> { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can I send InMail without a premium account?", "acceptedAnswer": { "@type": "Answer", "text": "No. InMail requires a paid LinkedIn subscription. Free accounts can only message their 1st-degree connections." } }, { "@type": "Question", "name": "Do InMail credits expire?", "acceptedAnswer": { "@type": "Answer", "text": "Unused credits can carry over, but only up to the accumulation cap LinkedIn publishes for your plan, and older credits expire after that. You can't stockpile indefinitely." } }, { "@type": "Question", "name": "What happens if someone doesn't respond to my InMail?", "acceptedAnswer": { "@type": "Answer", "text": "You don't get the credit back. Credits are only returned when the recipient replies, which is why response rate matters so much for InMail ROI." } }, { "@type": "Question", "name": "Can I send InMail to anyone?", "acceptedAnswer": { "@type": "Answer", "text": "Almost. People who have opted out of InMail in their privacy settings can't be reached this way." } }, { "@type": "Question", "name": "Is InMail better than a connection request?", "acceptedAnswer": { "@type": "Answer", "text": "It depends on your goal. InMail reaches people immediately without requiring acceptance. Connection requests don't use credits but require the person to accept before you can message them. For cold outreach to senior decision-makers, InMail can perform better because it doesn't require them to take an action first." } } ] } </script>

Ready to apply this playbook to your own outreach?

Outly helps you turn article-level strategy into personalized LinkedIn campaigns your team can launch fast.

✦43,000+ conversations started on Outly · 26% reply on LinkedIn

Related articles

More ideas from the same category.

Back to blog

outreach

2 Simple Ways to Find Open Profiles on LinkedIn in 2026

What LinkedIn Open Profiles are, why they matter for B2B lead generation, how to turn on Open Profile, and two practical methods to find them so you can send free InMails.

Read article

outreach

Does LinkedIn Have Read Receipts? How They Work and What They Mean for Outreach (2026)

Yes, LinkedIn has read receipts. They show the recipient's profile photo under your message, but only when both of you have them on. Here's how they work.

Read article

outreach

How Many InMails Can You Send on LinkedIn in 2026? Credits, Limits & Free Options

How many InMails you can send on LinkedIn: credits per plan, rollover and expiry rules, refunds, what happens when you cancel, and how Open Profile messages work for free.

Read article